Efficient Outdoor Work Vehicle for Heights of 17 to 33 Meters

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: CLW5123ZZFE6D
• Type: Self-propelled
• Certification: ISO9000, CCC
• Hoesrpower: 251-350hp
• Fuel: Diesel
• Transmission Type: Automatic
• Drive Wheel: 4x2
• Condition: New
• Height: 17-33 Meters
• Tire: 750r16
• Transport Package: Container
• Specification: 3360*2100*2250
• Trademark: CLW
• Origin: China
• HS Code: 8401100000
• Production Capacity: 1000

Product Description

  Efficient Outdoor Work Vehicle for Heights of 17 to 33 Meters

 

Mobile aerial work platforms refer to vehicles with a height of more than 3 meters,equipped with multiple hydraulic cylinders controlled by hydraulic or electric systems,capable of lifting up and down for operation. Aerial work platforms that carry people using hydraulic transmission are advanced machinery equipment of our time.Construction workers can use aerial work platforms to work in the air as long as they are used correctly, ensuring safety.

characteristics:Both the bucket and the slewing seat are equipped with operating devices for remote control of engine start/stop and high/low speed.
The arm movement is controlled by an electro-hydraulic proportional valve, ensuring good stability.The working arm can rotate continuously 360° left or right, and the linkage mechanism automatically maintains the work slot level.
In case of a main pump failure, it is possible to operate the emergency pump to lower the work slot. It also has night lighting and can lift heavy objects.
The product is widely used in high-altitude operation fields such as power, street lights, municipal, gardens, communications, airports, shipbuilding (repair),
transportation, advertising, photography, etc.

1.A new type of fully hydraulic self-propelled special chassis has been developed. The self-propelled aerial work lift vehicle with complete independent intellectual property rights, which adopts technologies such as electromechanical hydraulic integration, reliability design, and computer-aided design, has successfully developed a fully hydraulic drive, self-propelled special chassis, breaking through the limitations of previous domestic aerial work lift vehicles that could only use modified car or crane chassis designs.

2.The high-altitude work vehicle with track-type load-carrying travel and good working stability. The chassis structure breaks through the traditional design theory and methods, optimizing the overall layout of the upper platform and load distribution to reduce center of gravity offset. Adopting a unique large-angle rear-hinge structure and reasonably setting various counterweight modules effectively balances the working torque. With an H-shaped variable cross-section composite box beam flexible frame and high-load solid rubber tires, it increases the overall rigidity of the chassis, ensuring the stability of the whole machine during travel and operation, realizing the function of load-carrying travel for the aerial work lift vehicle.

3.A multifunctional and versatile work device. With the front support of the boom, it can quickly install lifting devices or manned platforms to achieve material lifting, hoisting, and manned high-altitude operations, while also providing an interface for expanding work devices and quick switching between various working devices.4.A unique three-dimensional rotating lifting device. The designed three-dimensional rotating lifting device can not only automatically maintain the posture of the lifted material, but also realize the adjustment requirements of the lifted material at any height, position and direction in space. The speed control is precise and sensitive, with good micro-movement performance, meeting the requirements of high-altitude operation and ventilation duct installation in large underground warehouses.

Classification:Aerial work vehicles, articulated aerial work vehicles, self-propelled aerial work platforms, telescopic boom aerial work vehicles, curved arm aerial work vehicles, cylinder extension aerial work vehicles, aluminum alloy aerial work vehicles. Among them, the vertical lifting type working bucket has a large load capacity but is limited in working height, with poor mobility and flexibility. Currently, the most widely used aerial work vehicle in China is the articulated aerial work vehicle.

operation:

1. Automobile drivers must hold a large bus driving license.
2. The auxiliary transmission must be disengaged from the hydraulic oil pump.
3.  Pay attention to the clearance height of bridges and tunnels.
4. The speed should generally not exceed 30 kilometers per hour, and in suburban areas, it should not exceed 40 kilometers per hour.
5. No personnel should remain in the work basket (platform).

Operating Requirements
The parking position selection should be on solid ground, with the overall vehicle inclination not exceeding 3°, and the warning flashing lights turned on. The working height and wind (Bowfort); for wind speeds of 6 levels or below, it is suitable to work at a height of less than 10 meters; for wind speeds of 5 levels or below, it is suitable to work at a height of 11 to 20 meters; for wind speeds of 4 levels or below, it is suitable to work at a height of 21 to 30 meters. Start the oil pump, press down the car clutch, pull up the hand brake, put the transmission in neutral, pull the hydraulic oil pump clutch lever, so that the hydraulic oil pump is in working condition. After the hydraulic oil pump runs for 2 to 5 minutes, you can then operate each action handle. The operation of the aerial work vehicle should be undertaken by trained personnel who hold an operation certificate. Operators must concentrate, prevent misoperation, and strictly prohibit operating under the influence of alcohol. First, extend the outriggers, and if necessary, place pads under the outrigger pads to ensure that the vehicle is level. When operating the control handles, be smooth and avoid sudden movements to prevent excessive inertial swinging of the boom and accidents. It is necessary to strictly adhere to the technical parameters and working range specified by the equipment. Personnel on the work platform (platform) should wear safety belts. When raising and lowering the work platform (platform), alternate movements of the upper and lower arms should be made to ensure that the work platform (platform) is in the best lift radius state, and it is strictly forbidden to use the boom for other purposes. During operation, operators should pay attention to the safe distance between the work platform (platform), arm and high and low voltage conductors, telephone lines, buildings, large trees, billboards, lighting decorations, etc. The driver on duty is responsible for ground safety and pays attention to vehicles coming and going. For vehicles with a working height of more than 25 meters, in addition to setting up safety signs and fences, one or two additional guardians are required on the ground besides the driver. If during operation, abnormal sounds or sudden external leakage of hydraulic fluid are found in the hydraulic system, stop working immediately and wait until inspection or repair before continuing work. If there is a fault in the hydraulic system and the boom cannot move, try to safely evacuate personnel from the work platform (platform) and notify professional maintenance personnel for handling. After completing the job, return the work platform (platform) and boom to their original positions, retract the outriggers, disconnect the hydraulic oil pump, release the hand brake, and only then start driving.

principle:I. Power Take-Off Device The power take-off device consists of an oil pump, a power take-off gear, and a flexible shaft pull wire. It is used to transfer the power output from the aerial work platform vehicle to the oil pump, converting it into hydraulic energy. When the handle installed in the driver's cab of the aerial work platform vehicle is operated, it engages or disengages the power take-off gear with the power take-off output gear inside the transmission through the flexible shaft pull wire, allowing the oil pump to start or stop working. II. Rotation Mechanism The rotation mechanism comprises a hydraulic motor, a planetary gear reducer, and a slewing bearing. Its operating principle is as follows: The hydraulic motor drives the reducer, which rotates the small gear on its output shaft to push the slewing bearing, causing the turntable to rotate. III. Central Rotary Coupling The central rotary coupling is installed at the center of the turntable's rotation and is used to solve the problem where the auxiliary frame remains relatively stationary on the ground while rotating upwards during operation. This allows for the transfer of hydraulic fluid and electrical energy from the lower vehicle to the upper vehicle. Due to the function of the slip rings, hydraulic pipes and wires do not become twisted. IV. Hydraulic System The hydraulic system is powered by a single main pump, with a working pressure of 14 MPa and a flow rate of 25 L/min. The working pressure is regulated by a safety valve. When leaving the factory, our company has already adjusted this setting. When the power take-off gear is engaged, it drives the main oil pump to operate, and the oil in the tank passes through the oil pump output to reach the outrigger control valve. After completing the outrigger operations, move the distribution handle to the upper vehicle position; at this time, hydraulic oil switches from the outrigger circuit to the upper vehicle circuit, enabling the upper vehicle components to start working.

maintenance:Maintenance and repair of any technical equipment on the vehicle requires maintenance and repairs. The scope and frequency of maintenance are determined by the working condition of the aerial work platform. According to different maintenance rules and intervals, maintenance is divided into three categories. Preparatory work for maintenance and requirements for maintaining work reliability are discussed in the maintenance manual. Inspection and maintenance require skilled techniques, which cannot be obtained from the instruction manual. To perform this task, it is recommended that personnel receive training at the Benz Service Station. To maintain good repairs, one needs skilled experience, factory technical data, workshop equipment, and maintenance tools. A reminder sign for maintenance should be attached to the door next to the driver's seat by the service station. Any repairs and maintenance should be based on the working conditions of the aerial work platform. Lubricants, fuel, coolant should be placed in a basin or similar container, not on the ground (environmental pollution). Do not run the engine for long periods. When operating on the vehicle, pay attention to safety regulations. For lubrication, the maximum pressure of the grease gun should not exceed 400 bar. Grease guns without safety devices may damage bearings, ball joints, seals, etc. Before greasing, ensure that the lubricating oil nozzle of Dongfeng 145 aerial work platform is clean; before removing the drain plug, make sure it is clean. Specialized equipment for lubrication should be carried out according to the manufacturer's instructions. Required specialized tools such as a set of universal tools and torque wrenches can be supplied by the service station spare parts department. All service stations store original parts required for maintenance and repair to ensure rapid supply of original parts to domestic and international customers. In the central equipment warehouse, over 200,000 different types of accessories are stored. There are even more accessories for older models of aerial vehicles. Using original parts on aerial work platforms maintains their optimal functionality and reliability, as these components withstand the highest quality inspection. Especially in the design, manufacture, or selection of each part for use with aerial work platforms; therefore, only original parts should be used.

1. What payment methods do you support? - We support T/T and L/C, as well as other methods you may require.
2. What is the minimum order quantity? - One unit
3. How long is the delivery time? - Typically, it takes 10 to 30 days after receiving your deposit. The actual date will depend on your order and product. If a specific delivery date is confirmed, we will contact you and track the goods until they arrive at their destination.
4. How can I confirm that your products meet my requirements? - You can tell us about your needs, such as size, material, volume, height, etc. Our professional sales team will provide solutions.
5. How do you package your products? - Standard shipping packaging.
6. How about the price? - Providing top-quality products and selling them at competitive prices has always been our mission. We hope to build long-term business relationships with customers rather than one-time transactions.
7. How can I trust you? - We have 15 years of experience in trailer manufacturing; we have our own factory. - We have supplied many famous companies both domestically and internationally; - We aim to provide you with quality service, not just price and product; - Meeting you is the first step, then we hope to make friends with you and maintain a business relationship consistently.