18t City Truck-Type Garbage Collection Vehicle (Waste Transfer Vehicle) for Overseas Direct Sale.

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: 5181SSAW276
• Type: Recycling
• Certification: ISO9000, CCC
• Volume: ＞15000L
• Emission Standard: Euro 4
• Transmission Type: Automatic
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: Dongfeng
• Models: Large
• Usage: Sealed
• Condition: New
• Transport Package: Container
• Specification: 15 cubic meters
• Trademark: CLW
• Origin: China
• HS Code: 3456788
• Production Capacity: 1000

Product Description

The specifications, models and technical parameters of garbage collection and transportation vehicles vary depending on the manufacturers and specific designs.The following are some common specifications, models and technical parameters sorted out from different sources,First, look at the feeding mechanism,As shown in the figureThe rear-loading compression garbage truck,
commonly known as the compression garbage truck,
 is mainly in contrast to the side-loading compression garbage truck.
The compression garbage truck can load, compress,
and transport waste from community bins.
 After compression, the volume is reduced,
and the transportation efficiency is high.
Especially with the gradual deepening of waste classification,
 the efficiency of transporting classified waste bins by compression garbage trucks has greatly increased.

Different regions and communities have different methods of waste collection at the grassroots level.
Different collection methods require different loading structures for compatibility.
 Here are some common types of filling mechanisms for rear-loading compression garbage trucks.
The most common waste collection containers at the grassroots level are 120/240L national standard trash bins.
 Therefore, we will first introduce this type of feeding mechanism.


The flipping mechanism can hang 2-3 standard square trash bins of 120/240L at the same time, flipping and dumping waste simultaneously.
 Paired with an air-driven sealing lid, the lid seals after loading is completed, preventing waste and odors from spreading during transportation.

In addition to the 120/240L national standard drums,
 some areas still use 300/360L round iron drums,
and some regions have adopted 660L square national standard drums.
The structure and the dumping mechanism for 120/240L trash bins are essentially the same;
 however, for the 660L square drums and 300/360L round iron drums, additional hanging hooks have been installed. These two structures can cover most of the common trash bins available in the market.

In some areas, in addition to hanging trash bins,
there is also a need for small collection vehicles such as manpower carts and tricycles to connect with the compression-type garbage trucks for compression and transportation.
This requires a small trash hopper that can be implemented on the ground. The mechanism shown in the picture is a triangular hopper. When lowered, the hopper is level with the ground,
allowing the waste from manpower carts and tricycles to be directly poured into the triangular hopper. After flipping over, the waste is dumped into the compression box. At the same time, hooks can be optionally installed inside the triangular hopper to fix 120/240L trash bins, meeting both the needs of hanging bins and collecting and transferring waste using manpower carts and tricycles.


Configuration: New flat arc body, body material is Wu Steel carbon steel, effective compression volume of 20 cubic meters,
 PLC one-key operation control, integrated flashlight operation mode, double electric control on both sides, with driver's cabin operation,reinforced floor support, bidirectional compression, open and easy to clean sewage box. The compaction garbage truck adopts electromechanical hydraulic integration technology, relying on the joint automatic control system of machinery, electricity, and hydraulics, computer control, and manual operating system. Through filling devices and pushers, it realizes waste dumping, crushing or flattening, strong loading, squeezing waste into the carriage and compacting and unloading it. All sewage enters the sewage collection box, solving the problem of secondary pollution during waste transportation. The compaction garbage truck has the functions of automatic repeated compression and crawling compression, with high compression ratio, good sealing performance, large load capacity, convenient operation, good environmental protection performance, and high overall utilization power. The operation is automated, and the waste collection method is simple.
Working Principle and Features Description: The entire vehicle is fully sealed, adopting electro-hydraulic integration technology. With the assistance of a combined automatic control system involving mechanical, electrical, and hydraulic components, it achieves waste dumping, crushing or flattening, and forceful loading through devices such as the truck body, filler, and pusher. During compression, wastewater is collected entirely in the sewage box, effectively addressing the issue of secondary pollution during waste transportatioFrame Structure: The trash bin is made of a sturdy frame structure with reinforced beams and steel plates welded together. The side and top surfaces are curved in an arc shape, making it aesthetically pleasing, lightweight, well-resistant to stress, and resistant to deformation. The push shovel consists of a rectangular tube skeleton and folding panels, which not only has a lightweight structure but also evenly distributes the waste for clean discharge. The filler mainly comprises components such as the filler shell, slide plate, and scraper. Each component adopts a force-bearing beam or box structure, ensuring a robust yet lightweight design. Sealing Treatment Eliminates Secondary Pollution: During compression loading and transportation, the waste remains in a closed state. A special rubber sealing strip is installed at the joint between the trash bin and filler, compressed and sealed using a locking device; a unique drainage valve is installed on the wastewater tank, providing reliable sealing that is less prone to clogging. An optional filler cover completely covers the filler's feeding port, eliminating the phenomenon of flying garbage dust caused by airflow disturbance at the car tail during transfer, making it even more aesthetically pleasing.

1. What payment methods do you support? - We support T/T and L/C, as well as other methods you may require.
2. What is the minimum order quantity? - One unit
3. How long is the delivery time? - Typically, it takes 10 to 30 days after receiving your deposit. The actual date will depend on your order and product. If a specific delivery date is confirmed, we will contact you and track the goods until they arrive at their destination.
4. How can I confirm that your products meet my requirements? - You can tell us about your needs, such as size, material, volume, height, etc. Our professional sales team will provide solutions.
5. How do you package your products? - Standard shipping packaging.
6. How about the price? - Providing top-quality products and selling them at competitive prices has always been our mission. We hope to build long-term business relationships with customers rather than one-time transactions.
7. How can I trust you? - We have 15 years of experience in trailer manufacturing; we have our own factory. - We have supplied many famous companies both domestically and internationally; - We aim to provide you with quality service, not just price and product; - Meeting you is the first step, then we hope to make friends with you and maintain a business relationship consistently.