| Customization: | Available |
|---|---|
| After-sales Service: | 24h |
| Warranty: | 3 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | CL5070GQX6HQ | ||
| Engine power (kW) | 95 | ||
| Maximum gross mass (kg) | 7360 | ||
| wheel base | 3308mm | ||
| Length, Width,Height |
5995×2000×2200mm
|
||
| Chassis configuration | Chassis Configuration:The Dongfeng original factory Dolika chassis is adopted. The cab is in engineering yellow color (other colors are optional). It is equipped with a Yuchai engine with a power of 140 horsepower that meets the National VI emission standard. The original factory girder is used. It has a Wanliyang 6-speed gearbox. The wheelbase is 3308mm. It is equipped with 7.00R16 original factory steel wire tires (including a spare tire), original factory ABS. It comes with power steering, a clutch booster, air brake system, and a heating and cooling air conditioner. Upper Equipment Configuration: 1. Tank Dimensions (Length × Width × Height) (mm): 2150×2000×1250. The water tank has a volume of approximately 4.5 cubic meters. The water tank is made of high-quality steel plates from Wuhan Iron and Steel Corporation, with a wall thickness of 4 mm. A reasonable anti-wave plate is designed in the middle of the tank. An inspection manhole is designed on the top of the tank, which can also be used as a water filling hole. It is equipped with a water level measuring tube and a handwashing device. 2. The water inlet of the water tank is a ball valve type fire hydrant (easy to open and close, durable), with a fire-fighting interface and a low water level drain port. 3. The high-pressure pump adopts the German (Pinfu) model 170L, with a pressure of 24 megapascals. A large self-developed filter is installed (to prevent impurities from entering the pump, and the filter is free of disassembly and cleaning). It has the function of blowing water with air (in winter, the water in the high-pressure pump and high-pressure pipe can be blown clean to prevent freezing damage). 4. The rear high-pressure reel can release and retract the pipe hydraulically, and can rotate 160 degrees (with positioning). It has the function of a flushing pipe (after the high-pressure pipe is used, it can flush the high-pressure pipe when retracting it). 5. The operating system is neatly arranged, and there are operation instructions and precautions. High-strength steel pipes are used for the important parts of the hydraulic pipeline, which are sturdy and durable. 6. It is equipped with 2 toolboxes and a rolling shutter door (convenient for maintenance and repair of the high-pressure pump). 7. The vehicle is equipped with a galvanized protective net and a patterned anti-slip guardrail (beautiful and durable). 8. The certified curb weight is 4120KG. It is registered with a blue license plate and is not overweight. |
||
Q1. Quality control
A:We make quality control for each step while producing and before shipping.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
LC terms is also can be accepted .
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .
Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
For standard products, delivery time is as below:
Water tanker truck:7 days
Fuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. How to control truck quality?
A: we have Rich experience workers and engineer to control quality before and on production , we strictly followed STATE special truck technical specification and safety production specification .
We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where
Q9. Did you sell truck to our country before?
A:Our main market is Africa, Asia, South America , Oceania ,middle east , annual sales is around 5000units and keeping growing every year .
they come from.
){kind=link}